Skysset

Go to Upload View Press the button "Choose files" Select all drone images in from the flight Once the portal finishes visualizing images locat...

This tutorial assumes you have already chosen a particular drone, screen device and software combination. If you would like to review that information you c...

Some of the more modern drone models separate flights by folder, but some do not. For those drones that do not segment automatically, figuring out where...

The process by which the 3D structure is inferred from just images is called photogrammetry. What happens is that structure can be determined from vision if...

Many types of materials can and have been volumetrically measured with Skysset. The main categories are scrap metals, aggregates, mulch, coke, and wood ...

The rule of thumb is about 1 hour per 100 images. This time does not count uploading time. This relation is not exactly linear, since the model complexi...

Review Pre-Flight Checklist There are many little tasks that need to be performed before even leaving your office or home to the flight location. Following...

Connecting to a drone for the first time can be confusing if it is not done correctly. The order of the steps is important and reduces the probability of co...

Floor points are a way of specifying where the floor is when it is not obvious. The way volume is measured is by determining the space between two surfa...

Click on stockpile to make it editable. Click it again to save, this will bring up the Stockpile Saving Menu Click "Add floor points" Click on...